Original Posted By: "Ian Holland"
Has anyone using the corvair ( or any engine ) went and got thecrank threaded for the safety bolt for the prop?What's a reasonable fee for going over the crank and doing a job like that?I thought I would throw that out on here before going around town.Want to have a little ammo when I start talking to them.CarlPlease visit my website athttp://www.megsinet.net/skycarlSign up with Paypal,it's free and they willgive you $5.00 just for joining.https://secure.paypal.x.com/refer/pal=s ... gsinet.net ________________________________________________________________________________
Pietenpol-List: Machine shop prices
Re: Pietenpol-List: Machine shop prices
Original Posted By: "Richard DeCosta"
"Ian Holland" Carl, I had the whole job done by a local auto machine shop for$150 Canadian. This included magnafluxing the crank, regrinding10 thou and threading. I guess the price of threading was about$50. They did not have to remove the gear, and it was a firstclass job. They had a real old guy in there and did his eyeslight up when he saw the crank. He knew right away what it was.FWIW,-=Ian=-________________________________________________________________________________
"Ian Holland" Carl, I had the whole job done by a local auto machine shop for$150 Canadian. This included magnafluxing the crank, regrinding10 thou and threading. I guess the price of threading was about$50. They did not have to remove the gear, and it was a firstclass job. They had a real old guy in there and did his eyeslight up when he saw the crank. He knew right away what it was.FWIW,-=Ian=-________________________________________________________________________________