Original Posted By: "walt evans"
Gents,I'm reviewing the GN-1 plans today. Some of the fittings are to be built fom .0654130N. I've got a bunch of .063N here in the shop. I know that conventionalwisdom calls for up-sizing, but the next thickness from Aircraft Spruce is.071. Anybody out there used .063 in their fittings?Thanks,Alan________________________________________________________________________________Date: Sun, 08 May 2005 12:55:42 -0500
Pietenpol-List: 4130 sheet substitution
Re: Pietenpol-List: 4130 sheet substitution
Original Posted By: Alan Lyscars
I believe the plans call for .065 for the elevator horns. The new plans have beenrevised to indicate .090 I think. .065 is ridiculously thin for elevatorhorns, so if you plan on using the .063 for that I would not reccomend it.DJ ----- Original Message -----
I believe the plans call for .065 for the elevator horns. The new plans have beenrevised to indicate .090 I think. .065 is ridiculously thin for elevatorhorns, so if you plan on using the .063 for that I would not reccomend it.DJ ----- Original Message -----
Re: Pietenpol-List: 4130 sheet substitution
Original Posted By: DJ Vegh
Thanks, DJ, for your help.Alan ----- Original Message -----
Thanks, DJ, for your help.Alan ----- Original Message -----