Original Posted By: Clif Dawson
The workshop was'nt opened much in the time the project sat still, so I think yourright Dick. Seeing its winter down here, I'm looking at ways to reduce therisks of this happening again. One of my other worries was that if I used themould treatment would it effect the glue properties. I emailed West Systems andgot word back this morning that there will be no degredation of the glue. Whew!! Thanks for the input guys.Mike GreenRomseyVictoriaAustralia.________________________________________________________________________________Date: Tue, 21 Jun 2005 23:42:39 -0700
Re:Pietenpol-List:Mould
Re: Pietenpol-List:Mould
Original Posted By: TRichmo9(at)aol.com
Subject: Re: Pietenpol-List:Mouldhey what happened to cpcworld.com i need to go to peters web site tom________________________________________________________________________________
Subject: Re: Pietenpol-List:Mouldhey what happened to cpcworld.com i need to go to peters web site tom________________________________________________________________________________
Re: Pietenpol-List:Mould
Original Posted By:
Tom,It's still there. Try www.cpc-world.com I paid Peter a visit about a month ago and he's done a great job. I wanted to get a few photo's and ideas before he covered it.( which won't be far off.)Regards,Mike GreenRomseyVictoriaAUSTRALIA----- Original Message -----
Tom,It's still there. Try www.cpc-world.com I paid Peter a visit about a month ago and he's done a great job. I wanted to get a few photo's and ideas before he covered it.( which won't be far off.)Regards,Mike GreenRomseyVictoriaAUSTRALIA----- Original Message -----
RE: Pietenpol-List:Mould
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Ted,It's http://www.cpc-world.com.CheersPeter.-----Original Message-----
Ted,It's http://www.cpc-world.com.CheersPeter.-----Original Message-----
Re: Pietenpol-List: Piet over Kansas
Original Posted By: Rcaprd(at)aol.com
We did a rework of the gallery about 1 1/2 years ago -- we've been runningMicrosoft FS2004 since then with the Piet on one sim. station & a Lear 45 onthe other station in that exhibit. You can download the Piet athttp://www.theoldhangar.com/ -- look for the "Grand Opening Special" --I'll have to adjust the settings and get the rudder bar ready for a futurevisit!! (the control yoke will probably stay -- it's survived 4 years ofuse!! ;-)Mike C.Pretty Prairie, KS ----- Original Message -----
We did a rework of the gallery about 1 1/2 years ago -- we've been runningMicrosoft FS2004 since then with the Piet on one sim. station & a Lear 45 onthe other station in that exhibit. You can download the Piet athttp://www.theoldhangar.com/ -- look for the "Grand Opening Special" --I'll have to adjust the settings and get the rudder bar ready for a futurevisit!! (the control yoke will probably stay -- it's survived 4 years ofuse!! ;-)Mike C.Pretty Prairie, KS ----- Original Message -----