Original Posted By: Gary Gower
Subject: Pietenpol-List: Wing drag wires and cablesIn a message dated 3/10/2007 3:19:37 PM Central Daylight Time, hanover(at)centramedia.net writes:what are you guys using as size for the brace cables that run in the same plane as the wing struts-(the X brace cables.) I used 3/32" cable for the lift strut X cables. I also used 3/32" for the drag / anti-drag cables, cabane cables around the front pit, and flipper cables. I used 1/8" for the rudder cables, and 1/16" cables for the empenage and tail wheel...the tailwheel cables go all the way up to the inboard portion of therudder bar.Chuck G.NX770CG************************************** AOL now offers free email to everyone. Find out more about what's free from AOL at http://www.aol.com.________________________________________________________________________________Date: Sun, 11 Mar 2007 23:14:53 -0700 (PDT)