Original Posted By: "Cuy, Michael D. (GRC-RXD0)[ASRC]"
Just came back from the shop. Both Charlie's rib and the 16 I copied from it are 27 3/4 inches from the back of the front spar to the front of the back spar. I guess we're talking the same language. The heartrate is starting to slow down now...Scott>From: "Bill Church" >Reply-To: pietenpol-list(at)matronics.com>To: >Subject: RE: Pietenpol-List: Wing Rib Template Problem?????>Date: Mon, 2 Apr 2007 18:01:08 -0400>>Hey Scott,>>I was just shutting the computer down to go home, and your e-mail popped>up.>I'm going by the plans, which show 1" spars, and the spacing is 27 3/4">from back side of front spar to front side of back spar (see attached>JPG clip).>That would translate into 28 3/4" center to center.>Maybe you need to re-measure.>Didn't you use one of the late Charlie Rubeck's ribs to build your jig?>I can't imagine his ribs were all incorrect.>>Bill>>>>_________________________________________________________________Win a trip for four to a concert anywhere in the world! http://www.mobilelivetour.ca/__________ ... ___Subject: Pietenpol-List: Piet video now on DVDDate: Tue, 3 Apr 2007 07:11:41 -0500
Pietenpol-List: Piet video now on DVD
RE: Pietenpol-List: Piet video now on DVD
Original Posted By: "Bill Church"