Pietenpol-List: tailwheel steering arm question

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: tailwheel steering arm question

Post by matronics »

Original Posted By: "Oscar Zuniga"
Guys (and gals?)Just finished building a tailwheel, and am scratching my head about what length to make the steering arms. How long are yours?Douwe________________________________________________________________________________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: tailwheel steering arm question

Post by matronics »

Original Posted By: lshutks(at)webtv.net (Leon Stefan)
Douwe; you're going to get a different answer from each Piet builder and pilot as to how long the steering arms are on their tailwheels. On 41CC, Corky made the arms plenty long and made several holes in each so the connection point could be changed. A couple of pictures for you:http://www.flysquirrel.net/piets/tailwh01.jpg shows the arms on Ernie Moreno's Piet, about as short as any you'll see.http://www.flysquirrel.net/piets/P6090001.JPG shows the ones on 41CC and you can see that I'm using the center holes on each arm. The outer holes are way too far out so actually these arms could be cut down. Maybe this gives you something to go by...Oscar ZunigaSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net_________________________________________________________________See what youre getting intobefore you go there http://newlivehotmail.com/?ocid=TXT_TAG ... __________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: tailwheel steering arm question

Post by matronics »

Original Posted By: hvandervoo(at)aol.com
Locked