Pietenpol-List: Re: wing stress article chart and illustration

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: Re: wing stress article chart and illustration

Post by matronics »

Original Posted By: "Steve Glass"
Subject: Pietenpol-List: Re: wing stress article chart and illustrationQuite some time ago during my intense research phase I saw an article along with illustrated information on wing stress related to the Piet, I believe? The article discussed and illustrated all of the wing stress points and stressvalues along the wing surfaces at the leading edge. Naturally I was so impressed by the content I printed out the article for study at a later date andmoved on to the next research item.Well as luck may have it, I can not locate the article in any of my materials nor can I locate it on the net. Does anyone recall the article and location? I am trying to get it again. I would appreciate any information on thatarticle or similar topic.Please adviseThanksJohn________________________________________________________________________________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> Re: Pietenpol-List: center section wing tank

Post by matronics »

Original Posted By:
Piet + 6 ?????????Steve in Maine>From: AMsafetyC(at)aol.com>Reply-To: pietenpol-list(at)matronics.com>To: pietenpol-list(at)matronics.com>Subject: Re: Pietenpol-List: center section wing tank>Date: Thu, 4 Oct 2007 09:12:36 EDT>>Being a wide body builder I like the idea of a wide body logo! Any ideas on>a design?>>John>>_________________________________________________________________Spiderman 3 Spin to Win! Your chance to win $50,000 & many other great prizes! Play now! http://spiderman3.msn.com________________________________________________________________________________Date: Thu, 4 Oct 2007 9:04:33 -0700
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: center section wing tank

Post by matronics »

Original Posted By:
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: center section wing tank

Post by matronics »

Original Posted By: owner-pietenpol-list-server(at)matronics.com
I had briefly thought of that. The biggest problem is the drag and anti-drag wires.A lot of Pipers are that way and they have tubes welded in the tanks withthe wires passing through the tubes. Not worth the trouble in my opinion unlessyou really need the extra fuel capacity.Brian KrautEngineering Alternatives, Inc.www.engalt.com -----Original Message-----
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: center section wing tank

Post by matronics »

Original Posted By: Ryan Mueller
Subject: Re: Pietenpol-List: center section wing tankthis is the place that form and function meet! John________________________________________________________________________________Date: Thu, 4 Oct 2007 14:17:12 -0700 (PDT)
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: center section wing tank

Post by matronics »

Original Posted By: Rcaprd(at)aol.com
Subject: Re: Pietenpol-List: center section wing tankAhhhhhhhh yes the ole rag in the pocket trick! all you need do is clean up on fuel spill and return the rag to you back pocket an interesting lesson willsoon ensue. One I learned the hard way ,as a young, ambitious teenage gas jockey at my uncles garage and gas station. Certainly a lesson not to be forgotten easily if at all and certainly not the only one enriched by the hightest experience of Sunoco custom blended motor fuels of the 1960's.Hence first encounter with the issues of right to know, skin absorption and related safety issues.Enjoy the adventure and add to the treasure chest of life experience wealth !John________________________________________________________________________________
Locked