Original Posted By: "Peter W Johnson"
Perhaps someone could request that Matt Dralle create an "off-the-wall idea" list. It would help the 99% of us that don't want to redesign everything just for the sake of doing it continue to enjoy this forum. My $0.02. Sent from my Verizon Wireless BlackBerry---------------------------------------------------------------------- 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3Dhttp://www.matronics.com/contribution3D=3D=3D= ... __________
Pietenpol-List: Formed Control Horns
Pietenpol-List: Formed Control Horns
Original Posted By: Michael Groah
Did anyone rust protect the inside of the the formed control horns so they don'trust from the inside out? If so what did you use?ChrisSacramento, CA--------Chris TracySacramento, CAWestCoastPiet.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Thu, 11 Dec 2008 13:00:39 -0800 (PST)
Did anyone rust protect the inside of the the formed control horns so they don'trust from the inside out? If so what did you use?ChrisSacramento, CA--------Chris TracySacramento, CAWestCoastPiet.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Thu, 11 Dec 2008 13:00:39 -0800 (PST)
Re: Pietenpol-List: Formed Control Horns
Original Posted By: "TOM STINEMETZE"
Re: Pietenpol-List: Formed Control Horns
Original Posted By: "Catdesigns"
Chris,I used LPS3, but I guess any rust preventitive compound will work well.Mike GreenAustralia----- Original Message -----
Chris,I used LPS3, but I guess any rust preventitive compound will work well.Mike GreenAustralia----- Original Message -----
Re: Pietenpol-List: Leaing ege follow up
Original Posted By: Michael Perez
Michael, I am not guessing at anything, I have been doing this stuff for over 30 years as an A&P/IA. Do whatever you want.Gene ----- Original Message -----
Michael, I am not guessing at anything, I have been doing this stuff for over 30 years as an A&P/IA. Do whatever you want.Gene ----- Original Message -----
RE: Pietenpol-List: Leaing ege follow up
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Gene,I built my Piet to Jim Will's PFA approved plans. They include the shapedspruce leading edge (nose piece) covered from the top of the front spar,around the leading edge nose spruce and all the way to the bottom of thefront spar. This forms a structural D section forward of the front spar. Allthe nose ribs and top and bottom spar contact points are glued.CheersPeterWonthaggihttp://www.cpc-world.com (check out "AirframeConstruction" -> "Wings" -> "Outer Sections" _____
Gene,I built my Piet to Jim Will's PFA approved plans. They include the shapedspruce leading edge (nose piece) covered from the top of the front spar,around the leading edge nose spruce and all the way to the bottom of thefront spar. This forms a structural D section forward of the front spar. Allthe nose ribs and top and bottom spar contact points are glued.CheersPeterWonthaggihttp://www.cpc-world.com (check out "AirframeConstruction" -> "Wings" -> "Outer Sections" _____
Pietenpol-List: Re: Formed Control Horns
Original Posted By: "Clif Dawson"
Chris,I did. I used boiled linseed oil. It just seems like that would be an area formoisture to collect.Don EmchNX899DERead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Chris,I did. I used boiled linseed oil. It just seems like that would be an area formoisture to collect.Don EmchNX899DERead this topic online here:http://forums.matronics.com/viewtopic.p ... __________