Original Posted By: Andrew M Eldredge
Air Camper NX41CC has common hardware store door handles attached to the lower longerons on both sides of the tail and I use the one on the port side almost every time I move the airplane. Seehttp://www.flysquirrel.net/piets/repairs/P7090010.JPG and the handle is visible just aft of the roundel.I maneuver the airplane in and out of the hangar with a home-made tailwheel dolly=2C details at http://www.flysquirrel.net/piets/dolly.html . Such a dolly could handle a tailskid as easily as it handles a tailwheel.Harvey=2C if I asked my wife to grab the tailwheel of the Piet and move it out of the hangar for me=2C I'd be eating vienna sausages and crackers and sleeping out on the street tonight. Either that or she'd stuff me in the cockpit of my @#$%& airplane and the tailwheel along with it.Oscar ZunigaAir Camper NX41CCSan Antonio=2C TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Fri, 8 May 2009 12:50:38 -0700Subject: Pietenpol-List: Varnish for Fuse Interior
Pietenpol-List: Varnish for Fuse Interior
Re: Pietenpol-List: Varnish for Fuse Interior
Original Posted By: Andrew M Eldredge
AndrewYou need to get hold of Rick Schreiber he is Mr coatings. Very knowledgeable andcan provide the material you need. I am using his finish and like it. The good news is he's on the board and a Piet builder. I can provide you his contactinfo off listJohn ------Original Message------
AndrewYou need to get hold of Rick Schreiber he is Mr coatings. Very knowledgeable andcan provide the material you need. I am using his finish and like it. The good news is he's on the board and a Piet builder. I can provide you his contactinfo off listJohn ------Original Message------
RE: Pietenpol-List: Varnish for Fuse Interior
Original Posted By: "Bill Church"
Re: Pietenpol-List: footnote in Pietenpol history
Original Posted By: helspersew(at)aol.com