RE: Pietenpol-List: Re: 1/2" web idea. Spar options--one man's method

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: Re: 1/2" web idea. Spar options--one man's method

Post by matronics »

Original Posted By: "Dale Johnson"
Subject: RE: Pietenpol-List: Re: 1/2" web idea. Spar options--one man's methodOscar, Yes, a dado blade would have worked much faster on making those U channels butI did nothave one at the time so used my router. The beauty of gluing those four strips of spruce to each corner of the 1/2" sparweb is thatyou don't need to dado or route anything. Mike C. ________________________________________________________________________________
Locked