Original Posted By: John Hofmann
Good People,I'm fabricating my jury strut attachment for the spar ala Mike Cuy and Jack Phillips.I was wondering what size bolts everyone has used to hold the fitting tothe spar. The Grega plans, which appear to be a copy of the Baby Ace design,uses AN4's. The attachment to the lift strut is only an AN3. It looks to me thatAN4's through the spar is overkill, not to mention weakening the spar evenmore. Rick Schreiber________________________________________________________________________________
Pietenpol-List: Jury strut attachment
Re: Pietenpol-List: Jury strut attachment
Original Posted By: hvandervoo(at)aol.com
Where did summer go? Seems like just a few days ago we were being rained upon at Brathead. I just snapped this outside my office. If anyone has a line on Federal 1500 skis let me know. Looking for a set for the Cub. "That all you going to do with your life, cash for rides?"-john-John HofmannVice-President, Information TechnologyThe Rees Group, Inc.2424 American LaneMadison, WI 53704Phone: 608.443.2468 ext 150Fax: 608.443.2474Email: jhofmann(at)reesgroupinc.com________________________________________________________________________________Subject: Re: Pietenpol-List: Jury strut attachment
Where did summer go? Seems like just a few days ago we were being rained upon at Brathead. I just snapped this outside my office. If anyone has a line on Federal 1500 skis let me know. Looking for a set for the Cub. "That all you going to do with your life, cash for rides?"-john-John HofmannVice-President, Information TechnologyThe Rees Group, Inc.2424 American LaneMadison, WI 53704Phone: 608.443.2468 ext 150Fax: 608.443.2474Email: jhofmann(at)reesgroupinc.com________________________________________________________________________________Subject: Re: Pietenpol-List: Jury strut attachment
Original Posted By: Richard Schreiber
RickAN 3 is enough, the jury strut is only to avoid a harmonic and flexing in the main strut.There should hardly be any load on it.Do make sure that the jury strut is not centered on the main strut but a few inches off to one site.HansNX 15KV-----Original Message-----
RickAN 3 is enough, the jury strut is only to avoid a harmonic and flexing in the main strut.There should hardly be any load on it.Do make sure that the jury strut is not centered on the main strut but a few inches off to one site.HansNX 15KV-----Original Message-----
RE: Pietenpol-List: Jury strut attachment
Original Posted By: owner-pietenpol-list-server(at)matronics.com
I used AN3'sJack PhillipsNX899JP "Icarus Plummet"Raleigh, NC _____
I used AN3'sJack PhillipsNX899JP "Icarus Plummet"Raleigh, NC _____