Pietenpol-List: Aircamper rudder control

matronics · Post by **matronics** » Tue Oct 19, 2004 5:44 pm

Original Posted By: "Carl D. Vought"

matronics · Post by **matronics** » Tue Oct 19, 2004 9:50 pm

Original Posted By: Rcaprd(at)aol.com
Subject: Re: Pietenpol-List: Aircamper rudder controlCarl,I suggest you just rig the rudder bar per plans, and run the rudder cables down low near the floor under the seat. Acording to AC 43.13 you can use hardwood (not pulleys) as a fairlead, if the deflection is less than 7 degrees.Chuck G.________________________________________________________________________________

matronics · Post by **matronics** » Thu Oct 21, 2004 9:50 am

Original Posted By: "Carl D. Vought"